You are here: Home > Burners & Burner Parts > Wayne Burners
Choose a sub category:
Wayne Burner Motors Wayne Burner Parts
Wayne Transformers
WAYNE COMBUSTION SYSTEM NO LONGER RECOMMENDS PILOTED GAS BURNERS FOR ANY OPERATION. WE NO LONGER MAINTAIN INVENTORY OF PILOTED GAS BURNERS, HOWEVER WE WILL CONTINUE TO OFFER PILOTED GAS BURNERS AS SPECIAL ORDER ITEMS. CALL FOR PRICE & LEAD-TIME. BE ADVISED SPECIAL ORDER PILOTED GAS BURNERS ARE NOT RETURNABLE. CHECK STATE AND LOCAL CODES FOR ACCEPTABILITY OF PILOTED GAS BURNERS IN YOUR AREA
Sort By:
Page of 1  
WAYNE MSR-DC 12V BURNER W/7116 PUMP
WAYNE MSR-DC 12V BURNER W/7116 PUMP
Our Price: $418.05

WAYNE MSR-DC 12V BURNER W/7116 PUMP, A specially designed burner for No. 1 or No. 2 fuel oil which allows the burner to oerate from a gasoline driven engine through the alternator and a heavy duty battery WITHOUT the need for a generator.
This burner features:

- Specifically designed 12 volt solid state ignitor, runs constant duty to reignite oil in case of flame loss
- 12v DC, permanent magnet, ball bearing motor with replaceable brushes
- firing rate from 1.00 GPH to 2.75 GPH
- Industry standard MSR components with the exception of motor and ignitor
- Fuel solenoid included
WAYNE 239-001 EHASR BURNER
WAYNE 239-001 EHASR BURNER
Our Price: $346.88

WAYNE 239-001 EHASR BURNER 3 3/4",115V 3 GPH, 6.25" FAN, The Burner assembly delivers the fuel in properly atomized form, delivers the proper amount of air with the fuel, and provides for ignition of the mixture of atomized fuel oil and air in order to start the pressure washer heating system.
Almost every burner assembly consists of the following:

- fuel pump
- fuel nozzle
- fuel storage and handling system, including a fuel tank, lines, and filter
- a blower
- transformer
- electrodes for ignition
- power source to drive the pump and blower
- an electrical power supply
- a solenoid valve to control fuel flow
WAYNE 239-005 EHASR BURNER
WAYNE 239-005 EHASR BURNER
Our Price: $365.00

WAYNE 239-005 EHASR BURNER 3 3/4",230V 3 GPH, 6.25" FAN, The Burner assembly delivers the fuel in properly atomized form, delivers the proper amount of air with the fuel, and provides for ignition of the mixture of atomized fuel oil and air in order to start the pressure washer heating system.  Almost every burner assembly consists of the following:

- fuel pump
- fuel nozzle
- fuel storage and handling system, including a fuel tank, lines, and filter
- a blower
- transformer
- electrodes for ignition
- power source to drive the pump and blower
- an electrical power supply
- a solenoid valve to control fuel flow
WAYNE P250AF GAS BURNER
WAYNE P250AF GAS BURNER (61814, 61819, 63365 & 63366)
Our Price: Call 1-800-785-0802 for best possible price

The P250AF features an adjustable flame spreader to allow tailoring of the flame size to the combustion chamber. Fires from 50,000 to 250,000 Btu/hr. Power burner design will increase efficiency up to 30% over atmospheric gas burners. Available in 8" air tube length only.

All models feature forced draft compact design for high efficiency conversion of oil-fired furnaces, boilers, or water heaters to natural or LP gas. Direct spark ignition is recommended for most applications, however Standing Pilot is available. All Wayne gas burners include die cast aluminum housings for precise alignment of parts and a machined cast iron venturi for superior mixing of gas and air. Universal mounting flange adapts to any appliance. All models factory-wired and test-fired.

Available configurations:
Wayne Part# 61814 with 8" Air Tube, Fuel: Nat, Standing Pilot Ignition, 24 lbs.
Wayne Part# 61819 with 8" Air Tube, Fuel: LP, Standing Pilot Ignition, 26 lbs.
Wayne Part# 63365 with 8" Air Tube, Fuel: LP Direct Ignition, 24 lbs.
Wayne Part# 63366 with 8" Air Tube, Fuel: Nat Direct Ignition, 24 lbs.
WAYNE P265F GAS BURNER
WAYNE P265F GAS BURNER
Our Price: Call 1-800-785-0802 for best possible price

The P265F features a fixed flame spreader, providing a consistent, bushy, round flame. Applications include furnaces, boilers, and water heaters. Fires from 65,000-200,000 Btu/hr. Quiet operation with simple design that is easy to install and service. Available in 5", 8" and 11" air tube lengths.

All models feature forced draft compact design for high efficiency conversion of oil-fired furnaces, boilers, or water heaters to natural or LP gas. Direct spark ignition is recommended for most applications, however Standing Pilot is available. All Wayne gas burners include die cast aluminum housings for precise alignment of parts and a machined cast iron venturi for superior mixing of gas and air. Universal mounting flange adapts to any appliance. All models factory-wired and test-fired.

Available configurations:
Model P265F, Wayne Part# 61487 with 5" Air Tube, Fuel: Nat, Standing Pilot Ignition, 22 lbs.
Model P265, Wayne Part# 61175 with 5" Air Tube, Fuel: LP, Standing Pilot Ignition, 24 lbs.
Model P265F, Wayne Part# 61493 with 8" Air Tube, Fuel: Nat, Standing Pilot Ignition, 24 lbs.
Model P265F, Wayne Part# 61497 with 11" Air Tube, Fuel: Nat, Standing Pilot Ignition, 25 lbs.
Model P265, Wayne Part# 61177 with 11" Air Tube, Fuel: LP, Standing Pilot Ignition, 25 lbs.
Model P265, Wayne Part# 63367 with 5" Air Tube, Fuel: LP, Direct Ignition, 23 lbs.
Model P265, Wayne Part# 63368 with Air Tube, Fuel: 5" Nat, Direct Ignition, 23 lbs.
Model P265F, Wayne Part# 63369 with 8" Air Tube, Fuel: Nat, Direct Ignition, 24 lbs.
Model P265, Wayne Part# 63370 with 11" Air Tube, Fuel: LP, Direct Ignition, 25 lbs.
Model P265, Wayne Part# 63371 with 11" Air Tube, Fuel: Nat, Direct Ignition, 25 lbs.

BOILER BURNERS
Model P265F BB, Wayne Part# 62301-001 7-3⁄8" Air Tube, Fuel: Nat, Standing Pilot Ignition, 24 lbs.
Model P265F BB, Wayne Part# 63388 with 7-3⁄8" Air Tube, Fuel: Nat, Direct Ignition, 24 lbs.
WAYNE SC80 GAS BURNER
WAYNE SC80 & SC80M GAS BURNER
Our Price: Call 1-800-785-0802 for best possible price

The SC80 performs well in a wide range of applications including, bakery ovens, smokers, commercial BBQ grills, residential furnaces, print drying equipment, parts washers and water heaters.

The Wayne Model SC80 pre-mix power gas burner is compact and designed for small combustion chambers. It offers features such as:
WAYNE HSG200 & HSG400 GAS BURNER
WAYNE HSG200 & HSG400 GAS BURNER
Our Price: Call 1-800-785-0802 for best possible price

The Wayne Model HSG power gas burners are designed for performance and reliability, and offer features such as:

• Higher static air pressure than standard power gas burners
• Good combustion in poor draft situations
• Capability to fire LP or Natural Gas
• Flame retention head to allow flame shapes to fit various combustion chambers
• Positive premixing of gas and air to provide excellent combustion characteristics (9 to 11% CO2 on Natural Gas)

Designed For Easy Serviceability:
• No need to remove the burner for normal service – “Gas Gun” assembly is easily removed for complete service or replacement of components
• Easy, external orifice change
• Automatic, perfect alignment of combustion components
• Primary air adjustment with indicator Designed For Installation Flexibility:
• Just change the orifice and adjust to fire LP or Natural Gas through the full burner range from 60M to 200M Btu/hr and 200M to 400M Btu/hr
• Complete range of marked orifice sizes supplied with each HSG burner
• Primary air inlet designed for optional outside air intake
• Industry proven components for excellent performance and reliability
• Automatic off-cycle air damper to minimize efficiency loss and provide maximum installation flexibility